English 
English 
Views: 9 Author: Site Editor Publish Time: 2022-08-09 Origin: Site
1. It is necessary to ensure the hook provided by the pillar to the ground in order to prevent the rv awning from being lifted by an unexpected gust of wind. For the sake of safety, we strongly recommend that you can also use some storm wires on the upper part of each support foot or anchor type awning and fiama tight belt.
2. We want to remind you that your sunshade is sunscreen, so please roll up your sunshade in case of wind, rain or snow. Otherwise, please take the following preventive measures: lower the pull rafters (excluding the length of the awning) on one side of the awning as shown in the figure to allow the water to flow away.
3. Connect the adjacent hinges and point its support towards you.
4. Lower the strut as shown.
5. In order to avoid unnecessary tension on the awning. We suggest that the bracket should be opened at about one meter like the side of the vehicle.
6. After the awning is fully opened, adjust the pillar at the selected height.
7. If you want to fix the support column to the vehicle, insert the terminal into the bracket arm, and the bracket can only be fixed on the reinforcement point.
8. Untie the strut.