Key points for maintenance of Vehicle Mounted Curved Arm Awning in summer

1、Daily maintenance of Vehicle Mounted Curved Arm Awning

Due to the large temperature difference in summer, the nuclear membrane material of steel structure has to undergo more severe tests than usual, and the maintenance frequency on weekdays is more intensive than that on a daily basis.

2、The car shed with large span shall be reinforced in extreme weather

The vehicle mounted outdoor sunshade of the steel structure series is a kind of large-span shed with open surroundings. The height from the ground is more than 10 meters. The upper and lower surfaces of the shed are subject to a certain degree of wind load. Because too much attention is paid to the beauty of the appearance, there will be many types of conditions such as separation, reattachment, vortex and reflux outside the shed. The wind load coefficient is not so easy to determine, and the distribution of wind load on the surface is not very simple.

3、The vehicle shed, electric wire catenary and other objects shall be pretreated in advance

When the shed is close to the wire catenary and other related objects, pretreatment must be done to reduce the steel structure shed from touching the catenary due to the falling of the sealing plate along the opening, or accidents caused by short circuit of wires.

4、Antirust the metal of the parking shed

Summer is a hot and humid season. It is easy to cause corrosion to the metal steel structure of the Vehicle Mounted Curved Arm Awning. It is necessary to check it, especially repair the welded parts, carry out anti rust treatment on the metal parts of the shed, or replace the parts.